Pillow type packaging machine maintenance

September 05, 2022

Pillow type packaging machine maintenance:

1. Before cleaning and wiping the machine, turn off the power first to ensure the safety of man-machine.

2. Wipe the surface and outer surface of the machine with a clean damp rag to ensure that the pillow packing machine is not scratched. This cleaning and maintenance work should be carried out regularly.

3. Use compressed air to remove product debris from the feeding mechanism and the middle and end seals.

4. Remove the attached film fragments from the end-sealing knife with a wire brush coated with oil. If the packaging material remains on the knife, this will affect the packaging of the next round of products, resulting in poor packaging.

5. The solid state breaker is burned out, the temperature control table is damaged, and the temperature meter cannot control the temperature when the thermocouple is damaged. The method of maintenance is to replace the thermocouple, replace the temperature control meter, and replace the heating element.

6, there is the pillow packaging machine feed and exit, will leave product debris, must be cleaned, use the air compressor to clean, the effect is also very good.

The above is the Pillow type packaging machine maintenance we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:cutting machine

Next:pillow packing machine